CAMPlete CNC SOFTWARE
Welcome to CAMplete TruePath TurnMill CNC Software, specifically designed and ideally suited for Nakamura’s, multi-tasking, multi-turret machines .
ETG is the exclusive supplier of CAMplete software products. Get the most out of your multi-tasking Nakamura machine with CAMplete TruePath TurnMill.
Multi-tasking, multi-turret machines, for example, Nakamura Tome’s are powerful and versatile CNC machines. In the past, finding CNC software that would complement these types of machines proved somewhat tricky.
CAMplete TruePath TurnMill
Introducing CAMplete TruePath TrueMill, powerful CAM tools that enable you to get the maximum return on your investment.
By applying CAMplete’s existing expertise in multi-axis machine simulation and post-processing to these types of machines, CAMplete TruePath TurnMill can optimise your programming process.
CAMplete TruePath TurnMill is a seamless, integrated environment that allows you to combine output from all of your CAM Systems. The result is a fully optimised set of multitasking programs; verified and ready to run on your machine.
Simulation and Verification
CAMplete TruePath TurnMill software includes a large variety of tools for simulating and verifying your CAM programs. Hugely important G-Codes and machines cycles are simulated, including part exchanges and wait codes. Simulations can be broken down to the milli-second. You can witness the exact behaviour of your machine in real-time, every-time.
If it can happen on your machine you can see it in CAMplete TruePath TurnMill first! Collision detection is performed between the machine components, tooling, parts, fixtures and work holding. An accurate simulation of your work environment ensures safe, ready to run programs, and your peace of mind.
- Full simulation of Nakamura turning centres and programs
- Detailed tooling and workholding libraries
CAMplete TruePath TurnMill not only performs G-Code simulation, it’s integrated environment includes a fully functional, context-sensitive G-Code editor which allows you to rapidly manipulate your programs. You can also easily translate or mirror tool paths, remove or add line numbers and check axis ranges. Full cut and paste functionality allows you to optimise your operations and even move them seamlessly from channel to channel. CAMplete TruePath TurnMill will always keep the G-Code and tooling up to date.
- Editor allows modifi cation of posted or unposted data
- Changes automatically updated to both toolpath and G-Code
Organisation and Analysis
CAMplete TruePath TurnMill has been designed to be one of the most efficient software programs available for multi-turret, multi-tasking machines. Wait codes can be easily modified and viewed, allowing you to make best use of the spindles and turrets. CAMplete TruePath TurnMill you can save time, save you money and do more!
- Wait code editing
- Reorder and move operations
- Fine tune and optimize to simplify multitasking
- Monitor all aspects of machine motion: true cutting speeds, axis velocity and acceleration, and motion deviations
- Verification of machine, tooling, and workholding using detailed Nakamura machine models
- G-Code is verified
ETG also offer the following CAD CAM software for CNC machines;
Read more about CAMplete here >.